You are here: Home / Tool / Cordless / 18V LXT / DTD171RTE

LXT Technology

(Tool + Batteries + Charger)

DTD171RTE_large.jpg

DTD171RTE

1/4" Cordless Impact Driver with Brushless Motor

Features NEW "Quick Change Memory Mode"

Variable 4-Speed, Reversible

LXT Technology LXT Technology 18V 5.0Ah Fuel Guage Battery
  • eXtreme Protection Technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions
  • 4 stage impact power selection + TEK 1, TEK 2, 'Cam-Out' and Auto-Stop modes to ensure precise fastening and prevent damage to fasteners
  • 'Cam-out' elimination mode operates at low speed until fastening begins to eliminate 'cam-out' and cross-threading
  • 2-stage TEK modes reduce impact power during final stages of fastener seating in thick or thin metal
  • Auto stop mode stops impact and rotation in 0.2 seconds after fastener is loosened (when trigger is fully depressed in reverse rotation)
  • Quick-change memory mode allows operator to rapidly toggle between two registered settings
  • Enhanced anvil holder rigidity with ball bearings reduces bit wobbling
  • LED charge level indicator displays approximate remaining battery power
  • Brushless DC motor with high power to weight and size ratio
  • Brushless DC motor generates less heat buildup and is ideal for prolonged use in manufacturing / production applications
  • Battery protection system provides over-discharge, temperature and current protection for enhanced performance, battery cycle life and overall battery life
  • Twin LED job lights with pre-glow and afterglow features
  • Ergonomic soft rubber grip design for vibration absorption and comfortable operation

Items Included:Two 18V (5.0 Ah) Li-Ion Battery BL1850B (196675-2), Rapid Charger (DC18RC), Battery Cover (450128-8), Hook (346449-3), Plastic Carrying Case (black) (821750-2)

  • eXtreme Protection Technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions
  • 4 stage impact power selection + TEK 1, TEK 2, 'Cam-Out' and Auto-Stop modes to ensure precise fastening and prevent damage to fasteners
  • 'Cam-out' elimination mode operates at low speed until fastening begins to eliminate 'cam-out' and cross-threading
  • 2-stage TEK modes reduce impact power during final stages of fastener seating in thick or thin metal
  • Auto stop mode stops impact and rotation in 0.2 seconds after fastener is loosened (when trigger is fully depressed in reverse rotation)
  • Quick-change memory mode allows operator to rapidly toggle between two registered settings
  • Enhanced anvil holder rigidity with ball bearings reduces bit wobbling
  • LED charge level indicator displays approximate remaining battery power
  • Brushless DC motor with high power to weight and size ratio
  • Brushless DC motor generates less heat buildup and is ideal for prolonged use in manufacturing / production applications
  • Battery protection system provides over-discharge, temperature and current protection for enhanced performance, battery cycle life and overall battery life
  • Twin LED job lights with pre-glow and afterglow features
  • Ergonomic soft rubber grip design for vibration absorption and comfortable operation

Items Included: Two 18V (5.0 Ah) Li-Ion Battery BL1850B (196675-2), Rapid Charger (DC18RC), Battery Cover (450128-8), Hook (346449-3), Plastic Carrying Case (black) (821750-2) 

Specifications

Battery Capacities: 18V Li-Ion
Hex Shank 1/4"
No Load Speed 0 - 3,600/3,200/2,100/1,100 RPM
Impacts Per Minute 0 - 3,800/3,600/2,600/1,100 IPM
Maximum Torque    1,590 in. lbs (180 Nm)
Vibration Level 13.5 m/s2
Noise Level 97 dB(A)
Overall Length 4-9/16" (116 mm)
Net Weight 3.4 lbs (1.5 kg)
18V LXT Cordless 500 lm LED Worklight (Tool Only)

18V LXT Cordless 500 lm LED Worklight (Tool Only)

Read More

User Manual: DTD171 - EN FR SP.PDF

Parts Breakdown: DTD171RTE, DTD171Z - JUL2022.pdf

Support: If you require support from any of our customer service teams, please call 1 800 663-0909(Western Canada), 1 800 263-3734(Eastern Canada & Prairies) or email customerservice@makita.ca

Warranty Info: Click Here

Battery Care Guide: Click Here