4-1/2" Angle Grinder w/Thumb Switch AC/DC

Powerful 7.5A motor delivers 11,000 RPM for high output power

Labyrinth construction seals and protects the drive gear and bearings from contamination for longer tool life

Compact design with small diameter barrel and lightweight for added comfort

4-1/2" Angle Grinder with thumb switch
Reliable machined gears provide twice or more longer service life
Powerful 7.5A genuine Makita motor delivers 11,000 RPM for high output power
Compact design with small diameter barrel and lightweight for added comfort
Protective zig-zag varnish seals the armature from dust and debris for longer tool life
Labyrinth construction seals and protects the drive gear and bearings from contamination for longer tool life
AC/DC switch for use with alternative power source
Improved thicker coil wires are wound more closely to reduce heat and energy loss
All-ball bearing design and metal gear housing for durability
Slide switch with lock-on for continuous use
Side grip can be positioned on both sides for operator convenience
Push button spindle lock for operator convenience
Gear housing can be rotated to suit most cutting and grinding applications
O rings for protection from grease-leakage
Switch lever conveniently located for one hand operation
Can be connected to dust extraction system with optional dust collecting wheel guard
Wheel cover protects operator from accidental scattering of broken wheel or workpiece with minimal wheel cover movement
Double insulated

Where to buy

Items Included:4-1/2" Depressed Centre Wheel (A-95956), Wheel Cover (123098-1), Inner Flange (224399-1), Lock Nut 5/8"-45 (224568-4), Side Handle (153489-2), Lock Nut Wrench 28 (782424-9)

A-95956

123098-1

224399-1

224568-4

153489-2

782424-9

Images shown may not represent the full listing or the true size of included items.

4-1/2" Angle Grinder with thumb switch
Reliable machined gears provide twice or more longer service life
Powerful 7.5A genuine Makita motor delivers 11,000 RPM for high output power
Compact design with small diameter barrel and lightweight for added comfort
Protective zig-zag varnish seals the armature from dust and debris for longer tool life
Labyrinth construction seals and protects the drive gear and bearings from contamination for longer tool life
AC/DC switch for use with alternative power source
Improved thicker coil wires are wound more closely to reduce heat and energy loss
All-ball bearing design and metal gear housing for durability
Slide switch with lock-on for continuous use
Side grip can be positioned on both sides for operator convenience
Push button spindle lock for operator convenience
Gear housing can be rotated to suit most cutting and grinding applications
O rings for protection from grease-leakage
Switch lever conveniently located for one hand operation
Can be connected to dust extraction system with optional dust collecting wheel guard
Wheel cover protects operator from accidental scattering of broken wheel or workpiece with minimal wheel cover movement
Double insulated

Items Included: 4-1/2" Depressed Centre Wheel (A-95956), Wheel Cover (123098-1), Inner Flange (224399-1), Lock Nut 5/8"-45 (224568-4), Side Handle (153489-2), Lock Nut Wrench 28 (782424-9)

Shipping Dimensions (Length x Width x Height) & Weight : 13.5 In. X 5.5 In. X 4.5 In. Weight : 6.61 Lb.

Specifications

Maximum Capacities:
Grinding Wheel	4-1/2" (115 mm)
Wire Cup Brush	3-1/2" (90 mm)
Abrasive Disc	4-1/2" (115 mm)
Spindle Thread	5/8" - 11 UNC
No Load Speed	11,000 RPM
AMPS (120V)	7.5 A
Vibration Level	7.5 m/s²
Noise Level	89 dB(A)
Dimensions (L x W x H)	10-5/8" x 5-1/8" x 4-3/16" (271 mm x 129 mm x 106 mm)
Net Weight	4.4 lbs (2.0 kg)